Westcan Sprinter Van Shelving & Upfit Parts
Sprinter van shelving from Westcan is cut to Sprinter body dimensions rather than adapted from a universal kit, and this collection covers the Mercedes-Benz Sprinter 2500, 3500, 3500XD and 4500 from the 2007 model year in standard, high and super high roof, on 144 and 170 inch wheelbases including the 170 inch extended. Liners are the largest group here: phenolic floor liner kits listed by wheelbase and by single or dual rear wheel, plus wall, ceiling and rear swing door kits. Alongside them are fixed, sliding-door, behind-second-row and driver-side-only safety partitions, two and three shelf units, fold-up shelving, heavy duty drawer packages and trade packages, all aluminum, all built in British Columbia. Part of the Westcan catalogue.
Aluminum Sprinter shelving, liners and partitions for three roof heights
Roof height matters more on the Sprinter than on most vans because the range spans three of them, and a high roof shelving unit will not go into a standard roof van. Westcan lists every part by roof and wheelbase, and floor liners by rear axle as well: the 2500 170 inch single rear wheel liner is a different kit from the 3500 144 inch dual rear wheel, because the wheel wells are not the same shape. Most liners and partitions cover 2007 to 2024, and rear swing door liners are listed for the 2019 to 2024 body.
The Sprinter is the van Westcan has built for longest, and the partition range shows it. Nearly every product carries Westcan's estimated install time, and brackets, hardware and instructions ship with the part.
Shop Sprinter upfit parts by type
Floor, wall, ceiling and rear door liners
Phenolic floor liner kits with a hexagon anti-slip surface, listed by model, wheelbase and single or dual rear wheel. Wall liner kits by wheelbase and roof, up to the 170 inch extended high roof, plus ceiling liners and rear swing door liner kits. Liners go in first.
Safety partitions
Solid and perforated fixed partitions in Gen 2 designs for the 2500 standard roof and the high roof, perforated sliding door partitions for the 2500, 3500XD and 4500 standard roof, solid behind-second-row partitions for crew vans in the high roof, and driver-side-only Gen 2 partitions for the high and super high roof.
Shelving and fold-up shelving
Two and three shelf units and fold-up units, such as the two-shelf fold-up at 32 inches long, 21 inches deep and 62 inches high for the 2500 standard roof, with shelving end panel kits at 17 inches deep by 58 inches high sold singly and as Bulk Buy packs. Every shelf carries 55 lb per linear foot.
Trade packages and drawer packages
Basic Starter, Starter Plus, Electrician, Plumber, HVAC, General Contractor, General Service and Courier packages, each specified for one Sprinter configuration, such as the HVAC package for the 2500 144 inch standard roof. Heavy duty drawer packages are listed the same way.
Shop by vehicle
- Sprinter 2500: the widest coverage in the collection, 144 and 170 inch wheelbases, standard and high roof, single rear wheel.
- Sprinter 3500: 144 and 170 inch wheelbases, high roof, dual rear wheel floor liners.
- Sprinter 3500XD and 4500: sliding door partitions and liners shared with the 3500.
- The Metris and other Mercedes-Benz vehicles are in Mercedes-Benz parts and accessories. The same Westcan range exists for the Ford Transit and Ram ProMaster.
Why Westcan for the Sprinter
- Listed by roof, wheelbase and axle. Floor liners distinguish single from dual rear wheel, so the kit you receive matches the wheel wells in your van.
- The deepest partition range. Fixed, sliding-door, second-row and one-side-only partitions across three roof heights.
- Published install times. Nearly every part in this collection carries Westcan's estimate, so labour can be quoted with the parts.
- Aluminum, hardware included. Lighter than steel, no rust, and brackets and fasteners ship in the box.
Choosing the right Sprinter parts
Confirm the model, roof height and wheelbase, and for floor liners whether the van is single or dual rear wheel, then check the compatibility table on the product page. Work in order: liners, then the partition, then shelving and drawers, then accessories. Depending on the trim level of your vehicle, some modification may be required. If you are not sure what fits, contact us with your year, make, model and configuration.
Common questions
Which Sprinter roof heights does Westcan cover?
Standard, high and super high roof. Each part names the roof heights it fits, and a high roof part will not fit a standard roof van.
Do I need a different floor liner for a dual rear wheel Sprinter?
Yes. Westcan lists floor liner kits separately for single and dual rear wheel, and the product title states which one the kit is for.
What is a behind-second-row partition?
A partition mounted behind the second row of seats instead of behind the front seats. It protects rear passengers in a crew van, or divides the cargo area in a van that carries both people and equipment.
Will Westcan parts fit a 2019 and newer Sprinter?
Most liners and partitions here are listed for 2007 to 2024, and rear swing door liners for the 2019 to 2024 body. Check the model year range on each product page and ask if your van is newer.