Buyers Products Electrical
Buyers Products 12V junction box, solenoid, fuse and backup camera parts for work trucks, from a Winnipeg dealer that ships across Canada. The collection covers 7 terminal junction boxes, continuous duty and intermittent duty 12 volt solenoids in plastic and steel cases, ATO/ATC and ATM micro dual fuse holders, 6-way and 12-way fuse blocks with covers, and Fleet Series backup camera systems with heated night vision cameras and 32 foot cables.
It also holds the SAM plow electrical parts: A, B and C solenoid coils and valves for Meyer and Diamond plows, motor solenoids for Fisher plows and the motor relay for Western, Fisher and SnowEx. Most parts ship in 7 to 10 business days.
12V junction boxes, solenoids and fuse blocks for truck upfits
Buyers Products makes the parts that land, switch and protect the wiring on an upfitted truck: the 7 terminal junction box that collects the leads from a body or spreader onto one terminal block, 12 volt solenoids listed as continuous or intermittent duty, dual fuse holders in ATO/ATC and ATM micro sizes (10 amp main, 5 amp added), 6-way and 12-way covered fuse blocks, and the Fleet Series backup camera systems with heated night vision cameras, a DVR and blind spot detection unit and a quad screen monitor. This is a sub-collection of Buyers Products Vehicle Accessories.
Shop truck electrical parts by type
12V junction boxes
The 7 terminal junction box is the automotive junction box most searches on this page are after: a screw terminal block in a housing that mounts to the frame or under the body and takes ring terminals.
Continuous duty and intermittent duty solenoids
The 12 volt solenoids come in plastic and steel cases, grounded or insulated, with +12V to activate wiring. Continuous duty suits loads that run for minutes, such as a hoist pump or liftgate; intermittent duty suits a plow motor that cycles a few seconds per stroke.
Fuse holders and fuse blocks
A dual fuse holder adds a second fused circuit off one feed, which is how a camera monitor gets its own protection without a new run to the battery. The 6-way and 12-way fuse blocks with covers give a full upfit one fused distribution point. Resettable protection is in circuit breakers.
Backup cameras and SAM plow solenoids
Optional 135 degree cameras (replacing part 8883500) and 32 foot cables extend the Fleet Series systems, and combination units put a camera inside a round or square LED flood light. The plow parts are the SAM line: 3/8 inch stem A solenoids, B and C coils and valves with 5/8 inch stems for Meyer and Diamond, Fisher motor solenoids and the flat bracket motor relay replacing Western, Fisher and SnowEx 52290. The rest of the plow catalogue is in SAM snow plow parts.
Common applications
Upfitters wiring a dump body, spreader or tarp motor use the junction boxes, solenoids and fuse blocks as the distribution layer between the chassis battery and the equipment. Fleet managers add the camera systems to cube vans and roll-off trucks where mirrors cannot cover the rear, and pair them with the floods in Buyers lighting.
Why Buyers Products electrical parts
- Solenoids listed by duty cycle and case. Continuous, intermittent, plastic, steel, grounded and insulated are separate listings, so the wiring style is stated before you order.
- Plow parts cross-referenced to OEM numbers. The C coil and valve set replaces Meyer 15358C; the motor relay names Western, Fisher and SnowEx 52290.
- Ships across Canada. Priced in Canadian dollars, most parts ship in 7 to 10 business days from Winnipeg.
Choosing the right solenoid or junction box
For a solenoid, settle three things from the title: duty cycle, whether the case grounds through its mounting or is insulated, and whether the coil activates with +12V or a ground. For plow solenoids, match the plow brand and stem size (3/8 or 5/8 inch) or the OEM number the listing replaces. For a junction box, count the circuits you need to land and add two spares. If you are not sure what fits, contact us with your year, make, model and configuration.
Common questions
What is a 12V junction box used for on a truck?
A 12V junction box gives the wiring from added equipment one protected terminal block to connect to. The 7 terminal boxes here take the feeds from a spreader, a light kit or a body harness so each circuit can be checked at a single point.
What is the difference between a continuous duty and an intermittent duty solenoid?
A continuous duty solenoid carries its rated current for long periods without overheating; an intermittent duty solenoid is rated for short bursts. Use continuous for hoist pumps and liftgates, intermittent for plow motors.
Which plow brands do the SAM solenoids fit?
The listings name Meyer, Diamond, Fisher, Western and SnowEx. Each title states the plow brand and the OEM number it replaces, so match that number rather than the plow model.